cn
current location current location: Home >  Product >  Damping absorption capacitor
2024 HCJT Sample book of damping absorber capacitor (HCZN) Category:Damping absorption capacitor

Product Introduction:Damping absorber capacitorDamping absorber capacitorMaterials and environmentHuachao Group (HCJT) pays special attention to environmental protection, selects suppliers according to ISO 9001 standards and performs statistical analysis of raw ……

Recommended products

  • product description

Damping absorber capacitor 



Damping absorber capacitor

Materials and environment

Huachao Group (HCJT) pays special attention to environmental protection, selects suppliers according to ISO 9001 standards and performs statistical analysis of raw materials before accepting them for manufacturing our electronic components. To the best of our knowledge, all materials are non-toxic and do not contain cadmium; Mercury; Chromium and its compounds; Polychlorinated biphenyls (PCBS); Bromine and chlordioxin bromate; CFCS and HCFCS; Asbestos.

Dissipation factor

The loss coefficient is a complex function related to the efficiency of the capacitor. tan delta changes up and down with increasing temperature. For more information, see Performance Characteristics.

Sealing

Sealed capacitor

As the temperature increases, the pressure inside the capacitor also increases. If the internal pressure is high enough, it may cause a gap in the capacitor, such a gap may lead to a leak of impregnating agent, filling gas, or water intrusion.

Atmospheric pressure

The working height of the capacitor affects the rated voltage of the capacitor. With the decrease of atmospheric pressure, the probability of arc discharge between terminals increases sharply. Capacitors are also subject to internal stresses due to pressure changes, and these effects may occur in the form of changes in capacitance capacitance, dielectric breakdown, or reduced insulation resistance. The altitude also affects the heat transfer of the capacitor, and the heat generated during operation cannot be dissipated in time, which may lead to high thermal resistance loss and cause failure.

Disclaimer

All product specifications, statements, information and data in this data sheet (collectively, the "Information") are subject to change for the purpose of better design and performance, and it is the Customer's responsibility to check and verify to what extent the information contained therein applies to the ordered product at the time of placing an order. The parameters in this data table are the best reasonable parameters for the current design, but it can also be customized according to the actual situation of customers. All information provided herein is accurate and reliable, but without warranty or liability of any kind, express or implied.

This information is for use only by customers who have the experience and ability to determine the right product for their place of application. Any technical advice inferred from this information or otherwise obtained with respect to the use of the products of HCJT is provided without compensation, but assumes no obligation or responsibility for the advice provided or the results arising therefrom.

Although HCJT designs and manufactures its products in accordance with the most stringent quality and safety standards, isolated capacitor failures can still occur given the current state of the art. Therefore, customers who require a high degree of reliability or safety should employ appropriate design or other safeguards (such as installation of protective circuits or redundancy) to ensure that failure of electrical components does not lead to a risk of personal injury or property damage.

The user must comply with all warnings, precautions and instructions related to the product.

  • No More
  • No More
  • Popular products

    top

    top